TCW210TH-v2.006 (Release date 2024-10-22)
   - SMTP optimization - Recipient emails extended to 128 symbols 

TCW210TH-v2.005 (Release date 2024-10-11)
   - SMTP optimization - Sender email, user name and password fields extended to 128 symbols

TCW210TH-v2.004 (Release date 2024-09-18)
   - Encrypted connection for DDNS service.

TCW210TH-v2.002 (Release date 2024-05-13)
   - RS-485 communication improvement

TCW210TH-v1.253 (Release date 2023-11-14)
   - added Hostname in DHCP Discover message (DHCP option 12)

TCW210TH-v1.252 (Release date 2023-10-11)
   - sensor values are displayed in 3 decimal places format, multiplier and offset in 6 decimal places format

TCW210TH-v1.250 (Release date 2023-03-30)
   - added notifications in case of sensors communication lost
   - MB sensors update optimization

TCW210TH-v1.248 (Release date 2022-11-14)
   - added 3 modes for HTTP post - Periodic&Alarm, Periodic and Alarm

TCW210TH-v1.247 (Release date 2022-10-20)
   - Firmware update optimization

TCW210TH-v1.246 (Release date 2022-10-17)
   - Modbus TCP/IP optimization

TCW210TH-v1.245 (Release date 2022-08-31)
   - optimization of HTTP communication

TCW210TH-v1.244 (Release date 2022-08-10)
   - optimization of TSM400 sensors support

TCW210TH-v1.242 (Release date 2022-06-22)
   - added TSM400 sensors support

TCW210TH-v1.240 (Release date 2022-03-16)
   - optimization of HTTP communication

TCW210TH-v1.238 (Release date 2021-07-22)
   - 1W sensors update optimization

TCW210TH-v1.237 (Release date 2021-07-05)
   - Mobdus RTU sensors optimization
   - optimization of HTTP API authentication 

TCW210TH-v1.236 (Release date 2021-04-26)
   - raw value, multiplier and offset added in the SNMP tree 

TCW210TH-v1.235 (Release date 2020-03-11)
   - removed extra bytes control for 1-Wire temperature sensors 

TCW210TH-v1.234 (Release date 2020-01-07)
   - fixed bug related with Modbus TCP/IP enable
   - fixed bug related with Backup/Restore of device configuration
   - fixed bug related with sensors ratio setup saving 

TCW210TH-v1.233 (Release date 2019-12-12)
   - added synchronization for the logger records
   - added HTTPS protocol for uploading of logger data
   - added HTTPS protocol for HTTP post
   - fixed bug related with HTTP API commands

TCW210TH-v1.232 (Release date 2019-10-14)
   - WEB interface optimization for sensors setup.

TCW210TH-v1.231 (Release date 2019-09-30)
   - optimization of procedure for 1-Wire sensors update

TCW210TH-v1.229 (Release date 2019-08-14)
   - Graphics bug fix

TCW210TH-v1.228 (Release date 2019-06-13)
   - HTML optimization

TCW210TH-v1.227 (Release date 2019-06-10)
   - HTML optimization

TCW210TH-v1.225 (Release date 2019-03-27)
   - JSON file BOM addition

TCW210TH-v1.223 (Release date 2019-01-30)
   - fixed bug related with first sensor position in Modbus RTU web page
   - fixed bug related with Highlight alarm values in the graphs
   - Connected to the previous updates, it is strongly recommended to use the following setting:
     DNS = 8.8.8.8	
     Time server = time.google.com

TCW210TH-v1.222 (Release date 2019-01-23)
   - M dbus RTU tool optimization;
   - M dbus RTU registers finding optimization;
   - M dbus RTU registers setup optimization;
   - M dbus RTU protocol optimization;
   - Connected to the previous updates, it is strongly recommended to use the following setting:
     DNS = 8.8.8.8	
     Time server = time.google.com

TCW210TH-v1.221 (Release date 2019-01-11)
   - Modbus TCP/IP bug fix

TCW210TH-v1.218 (Release date 2018-08-06)
   - Fix: if MODBUS RTU sensors are lost, the old Dew Point calculation stays on the Monitoring page.
   - Fix: change of the offset for 1-Wire sensors, doesn't affect on Dew Point calculation.
   - Fix: calculation of Scalled_value=(Raw_Value*Multiplier)+Offset.
   - Connected to the previous updates, it is strongly recommended to use the following setting:
     DNS = 8.8.8.8	
     Time server = time.google.com

TCW210TH-v1.217 (Release date 2018-05-31)
   - ThingSpeak module bug fix

TCW210TH-v1.216 (Release date 2018-04-24)
   - added system parameters (System name and Time) to the Monitoring page 
   - the default settings for System name and System location are changed 
  
TCW210TH-v1.215 (Release date 2018-04-12)
   - MODBUS RTU module optimization
   - added Modbus RTU communication setup - bit rate, parity, stop bits
   - added signed integer with a multiplier for Modbus RTU sensors
   - by default, the number of Modbus RTU sensors are 8
   - the default NTP server is changed to time.google.com
     It is strongly recommended to use the following setting:
     DNS = 8.8.8.8	
     Time server = time.google.com  


TCW210TH-v1.213 (Release date 2018-01-15)
   - MODBUS RTU implementation

TCW210TH-v1.212 (Release date 2017-10-18)
   - Multiplier and offset bug fix

TCW210TH-v1.211 (Release date 2017-09-07)
   - SNMP bug fix

TCW210TH-v1.210 (Release date 2017-07-13)
   - HTTP Post bug fix

TCW210TH-v1.209 (Release date 2017-04-05)
   - Mail bug fix.
   
TCW210TH-v1.208 (Release date 2016-12-16)
   - Dynamic DNS support.

TCW210TH-v1.206 (Release date 2016-10-12)
   - TLS encryption support.
   - SNMP bug fix. 

TCW210TH-v1.153 (Release date 2016-08-22)
   - SMTP settings optimization.
   - javascript bug fix.

TCW210TH-v1.152 (Release date 2016-08-09)
   - Graphics optimization.

TCW210TH-v1.151 (Release date 2016-08-08)
   - Web button "Save" optimization.